- New
Brand: COM
Brand: COM
Brand: Audio-Technica
Banner
Thomson STC 41 S stereo ceramic cartridge with three pins, for vintage record players and turntables using this mounting system. Supplied in its box with an STC 41 fitting notice specifying a 4 g tracking force.
Rare vintage part: carefully compare the marking, slide mounting, three connections and stylus position with your original cartridge.
100% secure payments
Shipment within 48 hours
Returns accepted within 30 days
Vintage ceramic / piezoelectric phono cartridge marked STC 41 S THOMSON. This three-pin model is intended for restoring Thomson equipment and other record players originally using the exact same cartridge body and carrier.
The same stylus family is also encountered under the Pathé Marconi STC 41 and STC-S names. These references are closely related, but the variant, mounting and wiring must be checked before treating the complete cartridge as interchangeable.
Replacement charts link the Pathé/Thomson STC 41 family to the Tonar 157 / 157-DS, a spherical stereo diamond stylus for 33 and 45 rpm records.
The same stylus family is referenced for Pathé Marconi STC-7, STC-S, STC-41 and STC-2000 D, Saba Disco Centre STC-10 S, and Thomson STC-100 D and STC-1000 D. This is a stylus cross-reference and does not by itself confirm complete-cartridge compatibility.
Stylus sellers also list Thomson 2130, 6041 TE, 8088, CC 6023, CH 010/020/070/079/081, RC 2091/2092/210/230 and TL 491, together with several Pathé Marconi models. These models are listed for the same stylus family; the cartridge body, mounting and three contacts must still be confirmed before ordering.
1 Thomson STC 41 B cartridge with its box and fitting notice, exactly as photographed.
Vintage part. Electrical operation and stylus wear should be checked before use when no prior test is stated in the listing.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Thomson STC 41 S stereo ceramic cartridge with three pins, for vintage record players and turntables using this mounting system. Supplied in its box with an STC 41 fitting notice specifying a 4 g tracking force.
Rare vintage part: carefully compare the marking, slide mounting, three connections and stylus position with your original cartridge.
check_circle
check_circle
We use optional technologies to measure our audience, personalize marketing and display external content. You can accept, refuse or choose each purpose.
Required for the cart, security, authentication and basic shop operation.