Nouveau

Cordon Speaker 5 M Speakon Type NL2 - Jack 6,35 1/4 " Cable HP x 2 1.5 mm ²

14,12 €

TTC

Quantité

Garanties sécurité

(à modifier dans le module "Réassurance")

Politique de livraison

(à modifier dans le module "Réassurance")

Politique retours

(à modifier dans le module "Réassurance")

Description
Détails du produit

NL2 / Jack speaker cord

Soft cable length 5 m

Conductors section: 2 x 1.5 mm ²

External diameter cable: 8 mm

Total net weight: 0.4 kg (400 g)

Professional quality

Brand: PD Connex

Quality connectors with robust jack type "jumbo", particularly suitable for power for passive speakers

Note Important: This cord model is assembled with an NL-4 type connector, wired on the pins 1+ and 1- in NL-2 mode (1 audio channel). It can be connected to a Based NL-4 wired on 1+/1-, but-although it is wired only on two contacts-will not be able to patch in a base NL-2 (NL-2 P)

Indeed, the relief of the NL-4 connectors, often used on only 2 pins (while they allow the connection of 4 points), is different from that of NL-2: an NL-2 can connect to a base NL-4, but not the opposite.

In the event of a problem or doubt, please contact us. And if you find that your speakers are equipped with NL-2 type bases, we can on your request Change the connector for free by replacing it with an NL-2

Speaker Cord NL2 / Jack
Flexible cable, length 5 m
Cross-section conductor: 2 x 1.5 mm ².
External Diameter Cable: 8 mm
Total net weight: 0.4 kg (400 g)
Professional Quality
Brand: PD Provnese
High-Quality Connectors with Robust Jumbo Jacks, Particularly Following for Powering Passive Loudspeakers

Important note: this model is assembled with an nl-4 type connector, wired on pins 1+ and 1- in nl-2 mode (1 audio channel). It can be connected to an nl-4 socket wired on 1+/1-, but-although it is wired on two contacts only-will not fit into an nl-2 socket (nl-2 p).

This is because the relief of NL-4 Connectors, Often used Only 2 Pins (Whereas they allow 4-Pin Connection), is different from that of nl-2s: an nl-2 can be connected to an nl-4 socket, but not vice versa.

This is a common anomaly, and we feel a reminder to manufacturers not to call cords equipped with an nl-4 plug "nl-2", even if it's wired on two points only. Fortunately, Most loudspeaker Manufacturers Take the Precaution of Equipping Them with NL-4 Sockets Wired on 2 points, and Able to Acquhen Nl-2 Plugs, But this can Pose A Problem when Connecting Older loudspeakers or Current Models Equipped With Nl-2 Sockets (Type NL-2 P).

If you have any problem or doubles, please contact us. And if you find that your loudspeakers are fitted with nl-2 type sockets, we can change the connector for you free of load before shipping, replacing it with an nl-2.

This is a current anomaly for which we have returned to manufacturers so that they do not name "NL-2" of the cords equipped with an NL-4 sheet, even if it is wired on only two points. Fortunately, most manufacturers of acoustic speakers take the precaution of equipping them with NL-4 bases wired on 2 points, and which can receive NL-2 files, but this can be a problem when connecting old speakers or current models equipped with NL-2 chassis (type NL-2 P) This is a common anomaly, and we feel a reminder to manufacturers not to call cords equipped with an nl-4 plug "nl-2", even if it's wired on two points only. Fortunately, Most loudspeaker Manufacturers Take the Precaution of Equipping Them with NL-4 Sockets Wired on 2 points, and Able to Acquhen Nl-2 Plugs, But this can Pose A Problem when

En stock 6 Produits

Fiche technique