Cable Speakon Speaker 10 M Type NL2 - Jack 6,35 1/4 " Cordon HP x 1.5 mm ²

Note Important: This cord model is assembled with an NL-4 type connector, wired on the pins 1+ and 1- in NL-2 mode (1 audio channel). It can be connected to a Based NL-4 wired on 1+/1-, but-although it is wired only on two contacts-will not be able to patch in a base NL-2 (NL-2 P)

Indeed, the relief of the NL-4 connectors, often used on only 2 pins (while they allow the connection of 4 points), is different from that of NL-2: an NL-2 can connect to a base NL-4, but not the opposite.

This is a current anomaly for which we have returned to manufacturers so that they do not name "NL-2" of the cords equipped with an NL-4 sheet, even if it is wired on only two points. Fortunately, most manufacturers of acoustic speakers take the precaution of equipping them with NL-4 bases wired on 2 points, and which can receive NL-2 files, but this can be a problem when connecting old speakers or current models equipped with NL-2 chassis (type NL-2 P)

In the event of a problem or doubt, please contact us. And if you find that your speakers are equipped with NL-2 type bases, we can on your request Change the connector for free by replacing it with an NL-2

Important note: this model is assembled with an nl-4 type connector, wired on pins 1+ and 1- in nl-2 mode (1 audio channel). It can be connected to an nl-4 socket wired on 1+/1-, but-although it is wired on two contacts only-will not fit into an nl-2 socket (nl-2 p).

This is because the relief of NL-4 Connectors, Often used Only 2 Pins (Whereas they allow 4-Pin Connection), is different from that of nl-2s: an nl-2 can be connected to an nl-4 socket, but not vice versa.

This is a common anomaly, and we feel a reminder to manufacturers not to call cords equipped with an nl-4 plug "nl-2", even if it's wired on two points only. Fortunately, Most loudspeaker Manufacturers Take the Precaution of Equipping Them with NL-4 Sockets Wired on 2 points, and Able to Acquhen Nl-2 Plugs, But this can Pose A Problem when Connecting Older loudspeakers or Current Models Equipped With Nl-2 Sockets (Type NL-2 P).

If you have any problem or doubles, please contact us. And if you find that your loudspeakers are fitted with nl-2 type sockets, we can change the connector for you free of load before shipping, replacing it with an nl-2.