Cable HP High Quality Speaker Hifi 2 x 4 mm ² Sch-Audio Copper Ofc

SCH Technical specification - AUDIO 05 H56063 - ST8171

Usespeakers, hi-fi speakers
Length1 to 50 m (with flow per meter)ColorwhiteInternal drivers    
2 x 4 mm²MaterialMulti-Brins ofc copperNo. of drivers2 Packagingby metre from 1 to 50 mWeight0.11 kg/m - 110 g/mOther features
Conductor identification by black net - flexible - 
Width flat: 9.5 mm , thickness flat: 4.75 mm

Important: the cheap cables commonly sold in the trade are most often cables presented as being with copper drivers, but are in fact composed of CCA = "Copper Clad Aluminum", that is to say made with a multibrin aluminum nucleus covered with a fine layer of copper, allowing external welding and presenting the external color of copper. These cables are cheaper, but are much less efficient, because their electrical conductivity is lower, and they are more difficult to weld. Their robustness and elastic resistance with repeated windings are also less. This type of cable is lighter and generates ohmic losses that can be significant in sound, as well as a risk of overheating in equal section with that of a pure copper cable.

Technical Special 

SCH - AUDIO 05 H56063 - ST8171

Intended UseSpeakers, High Fidelity Cabinets Length1 to 50 m (Flow Rate Per Metre)ColorWhiteInternal Conductor2 x 4 mm²MaterialOFC - MULTI -STRAND COPPER
No. of Cores2 Packagingper meter from 1 to 50 mWeight0.11 kg/m - 110 g/m

Other features: Wire Marking: Black Line - Flexible
Flat width: 9.5 mm , flat thickness: 4.75 mm

Important: The Cheap Cables Commonly Sold On the Market Are Most Often Cables Predated As Having Copper Copper Conductors, But are in fact made of CCA = 'Copper Clad Aluminum', Ie made with a multi-strand aluminum Core Covered with a Thin Layer of Copper, Allowing External Solder. of Copper. These cables are exhaustive, but perform much less well, because their electrical conductivity is low, and they are more difficult to settle. They are also robust and less resistant to rediming windows. This Type of Cable is Lighter and Generates Ohmic Losses that can be meaningful in sound system, as well as a risk of overheating when the cross-section is the same as that of a pure copper cable.